Laying Down on the Job (hammer)

[Richard Oliver Snelson]

It was about 15 seconds before I fired the high school student. 

Kidding....all most...Rich

Tom Driscoll wrote:
> 
> -----Original Message-----
> From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On
> Behalf Of Ron Nossaman
> Sent: Wednesday, October 02, 2002 10:44 AM
> To: Pianotech
> Subject: RE: Laying Down on the Job
> 
> >
> >              You don t tune with a socket wrench do you.
> 
> Well, yes, at least a crude version. It's called a tuning hammer
> 
>         Group,
>           As we've strayed from the original thread with my "socket"
> reference I will digress further.
>         When is the last time anyone has "hammered" something with their
> Rosewood coco bolo inlaid titanium Lever.
> I vote for a nomenclature moratorium on the name "tuning hammer" and
> encourage  the use of "tuning lever"
>         Cheerfully,Your devoted friend and colleague,
>         Thomas Henry Driscoll  RPT
> 
> 
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives