----- Original Message ----- From: "Farrell" <mfarrel2@tampabay.rr.com> To: <pianotech@ptg.org> Sent: October 16, 2002 9:38 AM Subject: Upright Lid Removal > Anyone know how a 1913 M&H lid is attached. Most that I have seen have to or more wood screws going into the framing and have the heads sticking out. Slots are recessed into the bottom of the lid and the lid slides onto these screw heads. Is this how this one is attached? If so, which way do I pound on the lid - pound from the front or the rear? Thanks. > > Terry Farrell There are two ways to remove one of these lids. (Three if you include the screw-on lids and you'll soon find out if this lid is one of those. If not, you're down to two.) 1) You can break it off. 2) You can cut it off. See my earlier post on removing the sides and repeat the process. Del
This PTG archive page provided courtesy of Moy Piano Service, LLC