---------------------- multipart/alternative attachment At 04:45 PM 10/16/2002 -0400, you wrote: >In a message dated 10/16/2002 11:38:53 AM Pacific Daylight Time, >bases-loaded@juno.com writes: > > >>Subj:Re: Piano Lac Finish >>Date:10/16/2002 11:38:53 AM Pacific Daylight Time >>From:<mailto:bases-loaded@juno.com>bases-loaded@juno.com >>Reply-to:<mailto:pianotech@ptg.org>pianotech@ptg.org >>To:<mailto:pianotech@ptg.org>pianotech@ptg.org >>Sent from the Internet > > > Mark >Thank you so much for this description. It was imenseley helpful. > I just finished another mahogony sample board this am. Although > it still had some open grain from spraying to heavy it came out fairly > well untill I got to the final rubout. With nitro cell we sand the final > gloss coats with 600 wet then finish with steel wool and polish for a > semi but glossyier than semi gloss appearance . We get a very translucent > finish starting out with a water dye. But when trying a similar rubout on > the water base gloss the end result is not as clear but kind of hazy. > It's much better than when we first started. Mr. Gutlo sent me a mahogony > piece nicely polished and the clarity is stunning but I don't wish to do > polished finnishes. So my question is what kind of rubout are you doing. > How's the clarity? Whats the process? I'll can't except anything muddy / > hazy looking myself. > By the way what product are you using???????? > Thanks again. Still grinding away in Modesto>>>>Dale Erwin Wet sand with 500 or 600 with a rubbing lubricant. Don't use water for a lube on water-based material. Effect a stain finish with grey Scotch Brite. Then give it two coats of Rain Dance Paste Car Wax. You will have a polished satin finish. Not flat and not too glossy. ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/8a/13/df/ab/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC