---------------------- multipart/alternative attachment At 09:13 PM 10/16/2002 -0400, you wrote: >In a message dated 10/16/2002 2:04:25 PM Pacific Daylight Time, >jonpage@attbi.com writes: > > >>Subj:Re: Piano Lac Finish >>Date:10/16/2002 2:04:25 PM Pacific Daylight Time >>From:<mailto:jonpage@attbi.com>jonpage@attbi.com >>Reply-to:<mailto:pianotech@ptg.org>pianotech@ptg.org >>To:<mailto:pianotech@ptg.org>pianotech@ptg.org >>Sent from the Internet >> >> >> >>At 04:45 PM 10/16/2002 -0400, you wrote: >>>In a message dated 10/16/2002 11:38:53 AM Pacific Daylight Time, >>>bases-loaded@juno.com writes: >>> >>> >>>>Subj:Re: Piano Lac Finish >>>>Date:10/16/2002 11:38:53 AM Pacific Daylight Time >>>>From:<mailto:bases-loaded@juno.com>bases-loaded@juno.com >>>>Reply-to:<mailto:pianotech@ptg.org>pianotech@ptg.org >>>>To:<mailto:pianotech@ptg.org>pianotech@ptg.org >>>>Sent from the Internet >>> >>>. >>> >>> Hi Jon >>> What do you mean by "effect a stain finish with >>> scotch brite." This is unclear. Thanks Dale Oops, another tpyo. It should be ...'a satin finish' Arthur supplies a great rubbing lube. >>Wet sand with 500 or 600 with a rubbing lubricant. Don't use water for a >>lube on water-based material. >>Effect a stain finish with grey Scotch Brite. Then give it two coats of >>Rain Dance Paste Car Wax. > ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/21/63/19/81/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC