Prototype for Key Magnets

Richard Brekne Richard.Brekne@grieg.uib.no
Fri, 11 Jul 2003 22:15:17 +0200


---------------------- multipart/alternative attachment
For those of you following this project, here is one suggestion for a
fully adjustable fold away key magnet assembly. It would be installed in
the key between the capstan and balance rail pin. The shank is held in
the up position tiny (2mm by 2mm) magnet pair. (see pictures below)

[Image][Image]
[Image]

--
Richard Brekne
RPT, N.P.T.F.
UiB, Bergen, Norway
mailto:rbrekne@broadpark.no
http://home.broadpark.no/~rbrekne/ricmain.html
http://www.hf.uib.no/grieg/personer/cv_RB.html


---------------------- multipart/alternative attachment

--------------13896722205B0468B25A2001
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/3d/ab/8f/86/attachment.htm

--------------13896722205B0468B25A2001
A non-text attachment was scrubbed...
Name: C:\\DOCUME~1\\RICHAR~1\\LOCALS~1\\Temp\\nsmailGI.jpeg
Type: image/jpeg
Size: 33608 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/44/83/53/42/nsmailGI.jpeg

--------------13896722205B0468B25A2001
A non-text attachment was scrubbed...
Name: C:\\DOCUME~1\\RICHAR~1\\LOCALS~1\\Temp\\nsmail8I.jpeg
Type: image/jpeg
Size: 33766 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/76/88/ca/28/nsmail8I.jpeg

--------------13896722205B0468B25A2001
A non-text attachment was scrubbed...
Name: C:\\DOCUME~1\\RICHAR~1\\LOCALS~1\\Temp\\nsmailJT.jpeg
Type: image/jpeg
Size: 32383 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/13/26/6a/04/nsmailJT.jpeg

--------------13896722205B0468B25A2001--

---------------------- multipart/alternative attachment--


This PTG archive page provided courtesy of Moy Piano Service, LLC