This is a multi-part message in MIME format. ---------------------- multipart/related attachment ------=_NextPart_001_0012_01C3363F.77E769C0 Below is a picture of my little rig. I just took a length of bendable = natural-gas line and put air-line fittings on it and a small-oriface = tip. I didn't come up with any good way to attach it directly to the = drill press, so I jury-rigged a piece of wood to help hold it in place. = I run the air at about 40 psi and find that I can easily hold the drill = bit in my hand immediately after drilling a whole section of pinblock - = it is barely warm. The air does a real nice job of clearing the cuttings = from both the work area and from the drill bit itself. Cheap, easy, = effective. Terry Farrell=20 =20 ----- Original Message -----=20 From: "Delwin D Fandrich" <pianobuilders@olynet.com> To: "Pianotech" <pianotech@ptg.org> Sent: Thursday, June 19, 2003 12:55 AM Subject: Re: Drill bit cooling >=20 > ----- Original Message ----- > From: "John Ross" <jrpiano@win.eastlink.ca> > To: "Pianotech" <pianotech@ptg.org> > Sent: June 18, 2003 3:11 PM > Subject: Re: Bolduc Block - Bit Size - Torque >=20 >=20 > > > One should always direct a stream of air at the bit. If one had = spare > money, > > one of Webb's vortex coolers is ideal. >=20 > Lacking that you might try some of Loc-Line's products. See: > http://www.loc-line.com/products/index.html >=20 > At least one woodworking tool supplier has put together a kit for the = drill > press. One of them is Woodworkers Supply: > http://www.woodworker.com/cgi-bin/search.exe?BP=3D1 > where they describe and sell this: >=20 >=20 >=20 > It is almost as good and very versatile. >=20 > Del > ------=_NextPart_001_0012_01C3363F.77E769C0 An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/dc/05/39/b6/attachment.htm ------=_NextPart_001_0012_01C3363F.77E769C0-- ---------------------- multipart/related attachment A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 74905 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/58/97/7d/11/attachment.jpe ---------------------- multipart/related attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC