Drop spoons on Brambach?

[JWyatt1492@aol.com]

---------------------- multipart/alternative attachment
Hello David,

    I suppose you could regulate the drop
by bending the spoon.  But I would suggest
you use the screw adjustment instead.
  
  You will find the adjustment point at the top 
of the flange thru the window just behind the 
center pin.  If you will look straight down at 
the top of the flange you will see it.
 
 Regulate this action exactly like a  (regular)
action.  While it looks different it works the 
same and just as well.

 BTW  there are three different   Brambachs.
The 5'3' is  their best scale.

Regards,

Jack Wyatt

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/36/db/54/f6/attachment.htm

---------------------- multipart/alternative attachment--