Buffing Keytops

[MKurta]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
I assume you're talking powered buffing wheels rather than by hand?  I =
mounted three large buffing wheels side-by-side on an electric motor =
that turns at 1750 rpm.  Then I use the large white stick type buffing =
compound that Pianotek sells on only the left-most wheel.  That leaves =
the other two clean for polishing.  Good results-if needed to removes =
scratches and imper-
fections, hold the keytop on the left side of the setup for as long as =
needed, then polish on the right side.  Talk to Mark at Pianotek, nice =
folks to deal with and very helpful with advice. =20
    Mike Kurta, RPT
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/1f/99/7e/6c/attachment.htm

---------------------- multipart/alternative attachment--