---------------------- multipart/alternative attachment Very thin brass tubing cut to length and put over the original pin, depending on the size of the pin. Craft stores and jewelers supply houses have this. It should fit really tightly over the existing pin but just in case you can dab a bit of epoxy on the existing pin before installation. You can lightly sand the brass tubing to thin it to the correct diameter. A lot of the Chinese pianos have the same issue. TP ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/d2/27/80/70/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC