Yeah Bill, I think you and Joe are right. I'm thinking about getting a 6'x3' 2" piece of maple and attaching it to two work bences that I saw on Harbor Freight wesite. The whole thing would be about $300. Rick Ucci/Ucci Piano > Rick, > > Just thinking some more, and having read others posts, If I were to do > again, I might consider the additional depth in the bench to accomodate the > stack. Seems like a good idea - now why didn't I think of that! > > William R. Monroe > Madison, WI > Assoc. > > > > ----- Original Message ----- > From: <richard.ucci@att.net> > To: "Pianotech" <pianotech@ptg.org> > Sent: Monday, May 17, 2004 7:53 PM > Subject: Re: workbench > > > > Thanks Bill, Those are the dimensions I was going to go with as well. > > > > Rick Ucci/Ucci Piano > > > > > > > Rick, > > > > > > Should be plenty. A grand action is typically around 20" deep. My > > > regulating bench is around 26" deep. Plenty of room to work and some > space > > > for placing tools, etc. I also made mine about 60" wide to accomodate > > > either a grand or vertical action in a cradle. > > > > > > William R. Monroe > > > Madison, WI > > > Assoc. > > > ----- Original Message ----- > > > From: <richard.ucci@att.net> > > > To: <pianotech@ptg.org> > > > Sent: Monday, May 17, 2004 7:36 AM > > > Subject: workbench > > > > > > > > > > Hi Guys, I'm updating my workshop and need some advise on depth of > > > workbench for action regulating etc. Is 30" deep enough to accomodate a > > > grand action and work comfortably? > > > > > > > > Rick Ucci/Ucci Piano > > > > _______________________________________________ > > > > pianotech list info: https://www.moypiano.com/resources/#archives > > > > > > > > > > > > > _______________________________________________ > > > pianotech list info: https://www.moypiano.com/resources/#archives > > _______________________________________________ > > pianotech list info: https://www.moypiano.com/resources/#archives > > > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC