---------------------- multipart/alternative attachment Hey, Joe. Well, where's the picture????? :-) Avery At 12:55 PM 8/1/05, you wrote: >Hi Folks , >Gotta give the other Joe G a thanks for the insight to make the >better design on my original try. >The second attempt produced a 1/4" hex tool but the working end is >minus the hook that I thought might be needed to hold the tool on >the capstan. And is now much stronger. >Total length is about 2 1/2" with the tip 7/16" X .103" Leaving >clearance to be used with the keys still on the rail. >The bit will work in a small cordless electric screw driver or >larger unit if you want the power or a standard 1/4" hex drive >handle for manual removal of a few. >Joe Goss RPT >Mother Goose Tools ><mailto:imatunr@srvinet.com>imatunr@srvinet.com >www.mothergoosetools.com >----- ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/e6/62/46/c8/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC