This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi Avery, Sorry no pictures untill after the 10th. My youngest son and fanily are here from Japan, and their photo program = is running on our computer. They will change the settings back to our camera when they leave. I will see if we can catch them long enough to get a tool pic out. Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: Avery Todd=20 To: Pianotech=20 Sent: Monday, August 01, 2005 3:14 PM Subject: Re: capstan remover update Hey, Joe. Well, where's the picture????? :-)=20 Avery=20 At 12:55 PM 8/1/05, you wrote: Hi Folks , Gotta give the other Joe G a thanks for the insight to make the = better design on my original try. The second attempt produced a 1/4" hex tool but the working end is = minus the hook that I thought might be needed to hold the tool on the = capstan. And is now much stronger.=20 Total length is about 2 1/2" with the tip 7/16" X .103" Leaving = clearance to be used with the keys still on the rail. =20 The bit will work in a small cordless electric screw driver or = larger unit if you want the power or a standard 1/4" hex drive handle = for manual removal of a few. Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com -----=20 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/b4/e7/09/31/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC