Spring clamps and glue. The ivory clamps that are just U shaped spring steel can also work. Thump --- John Delmore <jodel@kairos.net> wrote: > Back from the Beach!! Grand Isle is a great place, > although it was hot as > you-know-what. Blue crab, $25.00 a bushel-yum! > > Anyway, I checked the pH of Elmer's white glue, it's > 5.2. So it really > "shouldn't" be accelerating CA glue (which need > moisture, and hydroxyl ion > for reaction). I'll check the buffering capacity > when I get some time, may > be the CA glue has enough base to overcome the > Elmer's pH. I wish I could > try some experiments to determine the relative > bonding strengths, bonding > and curing times for various mixtures, but with the > Louisiana humidity, it's > gonna be tough for me to find a "dry" place to do > the tests. Maybe someone > in the desert Southwest would be interested in > collaborating? > > I bought the previously mentioned Brinkerhoff "lab" > piano yesterday. Talked > her down to $50.00 after looking at it. For my > purposes, it seems ideal-has > a couple of any kind of problem you ( I ) can > imagine. Couple of broken > hammer shanks (keys 1 & 2 though), about 3 broken > string (really high > treble), some "sprung" hammer heads. Keeping in > mind the purpose of this > piano (a learning tool-I'm not looking to resale for > a profit), does anyone > have any advice for a "temporary fix" for the sprung > hammer heads? I know > the tone will be crappy, and I will replace all the > hammers when I get to > that point, but for now, I'd just like to stabilize > them. Just glue the > felt back down and clamp? (BTW, this is not the > piano I'm learning to tune > on-that would be a nightmare!) > > John Delmore > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
This PTG archive page provided courtesy of Moy Piano Service, LLC