This is a multi-part message in MIME format.
---------------------- multipart/mixed attachment
Attached are the pictures of the tools that I use. The bent wire one is
made from a coathanger and is inserted into a cordless drill that will both
install and remove capstans with holes in them. It gets a bit bent out of
shape if you encounter very tight fitting capstans so you just make another
one. The other one is made from a small #8 wrench that I cut off one end
and drilled a hole through. Added a loose fitting knob the rotates freely
in the hole. This I use for removing old style Steinway hex capstans.
---------------------- multipart/mixed attachment
A non-text attachment was scrubbed...
Name: P1010049.JPG
Type: image/jpeg
Size: 29852 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/1b/83/fd/25/P1010049.JPG
---------------------- multipart/mixed attachment
A non-text attachment was scrubbed...
Name: P1010050.JPG
Type: image/jpeg
Size: 29167 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/18/b6/d8/ed/P1010050.JPG
---------------------- multipart/mixed attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC