Steinway O Redesign

David Skolnik davidskolnik@optonline.net
Fri, 10 Jun 2005 02:41:58 -0400


---------------------- multipart/alternative attachment
Dale -
Can you describe in a bit greater detail the 'modesty' of the cutoff and 
how you modified the rib spacing and size?  Why fanned? Also, are there 
similar measures you would (or do) make in the M?, or is that a perfect scale?

David Skolnik




At 10:15 AM 6/9/2005 -0400, you wrote:
>
>     The O I'm currently ushering out the door this week has a redesigned 
> board . I added a modest straight cutoff bar. I also added an extra rib 
> for more support in the treble so that in the first capo section there 
> are three ribs supporting the killer octave.  These taller less wide ribs 
> are also fanned into  the treble. There is no more killer octave, no weak 
> notes. It's strong & clear with so much pop & power & wonderful sustain. 
> All sustain freaks should welcome this.

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/e1/af/97/29/attachment.htm

---------------------- multipart/alternative attachment--

This PTG archive page provided courtesy of Moy Piano Service, LLC