On 12/2/06 10:35 PM, "Larry Trischetta" <ltpianoman at adelphia.net> wrote: > List... I have a set of knuckles to install and the wood core is slightly > narrower than the slot (it reaches the bottom). Is it acceptable to install > and let the glue fill in the gap or should I shim it with paper or anything > else? Or is it unacceptable to have a wood core that isn't snug? Thanks for > your help. > > Larry Trischetta > Chapter 186 > > <http://www.incredimail.com/index.asp?id=99000> Why not use the original knuckles? Just turn them around, so that the jack will hit virgin territory after they are replaced in the groove. (Unless there is something else wrong with them) If you notice, it is the front half that gets worn in a knuckle. S.P. -- -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20061203/38c67dd9/attachment.html -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 16469 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20061203/38c67dd9/attachment.jpe
This PTG archive page provided courtesy of Moy Piano Service, LLC