Thanks for the advice, Michael. What is the procedure for glue sizing the mortises? Ed >From: "MICHAEL MORVAN" <keymaestro at verizon.net> >Reply-To: Pianotech List <pianotech at ptg.org> >To: "Pianotech List" <pianotech at ptg.org> >Subject: Re: disrupted mortises >Date: Tue, 05 Dec 2006 20:54:07 -0500 > >Ed, > In my opinion, get out as much of that PVC-E glue as possible, it is >not compatible with hide glue, it is rubbery and when it has saturated the >pores no glue will stick well accept more of the same. Then machine a >mortise relief cut into the underside of the keystick to get a clean and >square mortise to work with. Now, you might want to glue size the mortise >with hide glue which can help the bushing to stick in a mortise that has >been saturated with PVC-E glue. Try and isolate the really bad mortises and >use thicker sized cloths or replace the mortise entirely, you have more >flexibility for slop in the front rail than the balance. The services page >of my website shows mortise relief cuts, glue sizing and mortise >replacement. Good luck and remember to spare the next technician the horror >of fixing a bad repair, because the next technician might be you. > >Michael A. Morvan >Blackstone Valley Piano >Dedicated To Advancing The Art Of Keyboard Restoration >76 Sutton Street >Uxbridge, Ma. 01569 >(508) 278-9762 >Keymaestro at verizon.net >www.pianoandorgankeys.com > >----- Original Message ----- From: "ed miller" <edmiller3 at hotmail.com> >To: <pianotech at ptg.org> >Sent: Tuesday, December 05, 2006 8:12 PM >Subject: disrupted mortises > > >>Hello, >> >>I'm doing a key re-bushing job. The front rail bushings were glued in with >>PVC-E glue. Many mortises were compromised by wood staying on the felt as >>I pulled the felt away. >> >>Any suggestions on what I can do as/or before I glue in the new felt with >>hot hide to ensure an even job from key to key? I have been testing the >>keys for the best felt-fit with my brass cauls, there are drastic >>differences of fit from key to key thanks to all the wood that was removed >>as I was removing the PVC-E'd felt. >> >>Thanks, >>Ed >> >>_________________________________________________________________ >>Visit MSN Holiday Challenge for your chance to win up to $50,000 in >>Holiday cash! >>http://www.msnholidaychallenge.com/default.aspx?ocid=tagline&locale=en-us >> >> > > _________________________________________________________________ Talk now to your Hotmail contacts with Windows Live Messenger. http://clk.atdmt.com/MSN/go/msnnkwme0020000001msn/direct/01/?href=http://get.live.com/messenger/overview
This PTG archive page provided courtesy of Moy Piano Service, LLC