Actually, in an experiment on a piano about to rebuilt at NBSS, Protek was applied liberally to tuning pins. Torque dropped a little in the short term, but was actually a little higher the next day! (Right, David?) I'm a lot less panicked about it, now. --Cy-- ----- Original Message ----- From: Andrew and Rebeca Anderson To: Pianotech List Sent: Monday, April 02, 2007 12:53 PM Subject: Re: Pin moves, pitch doesn't If problem is persistent in a section, treat the under felt-with Protek, no spills on the pinblock or pins please. Good Luck, Andrew -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070402/05e24a15/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC