Terry Ooopps sorry for the brain fade. Yes & by the way .......what he said. Below. Your block is one of the best I've ever twisted a pin in. Dale Look no further Dale, Mark and others. Exactly what you are looking for is already available to all rebuilders - and more. There is this custom shop in Florida that will laminate any thickness Delignit cap you want onto any thickness Pianotek Multilam (or any other commercially available pinblock - also available is custom handmade quarter-sawn hard maple blocks with a Delignit cap). Talk about custom, heck a couple months ago that custom shop even made up a block for a guy that had one of those old Kimballs with the elevated bass section - they put a thicker layer of Delignit in the bass only to make up the elevation difference. This shop will send you a rough capped block or custom duplicated - single or double. They even make up custom blocks with custom veneers for open-face pinblocks. Here is a picture of a hand-made quarter-sawn hard-maple block with a thick Delignit cap. ************************************** See what's free at http://www.aol.com. -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070428/91a939fa/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 32984 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20070428/91a939fa/attachment-0001.jpe
This PTG archive page provided courtesy of Moy Piano Service, LLC