Terry, My bit is also approx 2 mm at the tip. I don't think that yours is broken. Terry Beckingham RPT At 04:58 PM 2/14/2007 -0500, you wrote: >I'm looking for a reality check regarding the Spurlock Soundboard Repair >bit (the 20-degree angle bit for cutting into the soundboard panel for a >repair shim). > >My bit (which I haven't used for a couple years) has a flat tip that is >exactly two millimeters wide. I thought it came something closer to a >point rather than such a wide flat tip. Does anyone else out there have >one of these bits who would be willing to measure the tip width. > >Basically, I want a bit that has more of a point - I don't know if I've >broken the tip off mine, or that was how it was new. > >Thanks. > >Terry Farrell >Farrell Piano > ><http://www.farrellpiano.com>www.farrellpiano.com ><mailto:terry at farrellpiano.com>terry at farrellpiano.com -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070214/2781cc2b/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC