Marshall, It doesn't have to be sheet metal. It also could be cardboard or plastic sheet. It could be made with an empty liquid soap or bleach container. The idea is to have something rigid enough to fold the dampers while the mute felt is pushed down. Marcel Carey -----Message d'origine----- De : pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] De la part de pianotune05 at comcast.net Envoyé : 25 février 2007 19:09 À : pianotech at ptg.org Objet : strip muting with sheet metal Is there a subsitute for sheet metal? I don't have a shop. I wonder if they still make these metal rulers that were kinda fat and flimsy, and is so would that work? Marshall
This PTG archive page provided courtesy of Moy Piano Service, LLC