>If you cut a slot from the top of the pin to the becket hole in the >shortened tuning pin, your coil is can be easily slipped off. It's easier to cut up to the hole from 1/4" below it and the coil slips right off. Bass string coils (heavier gage) still need to be expanded (unwound so to speak) to easily transfer to the pin. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070228/3e1fc805/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC