Hey Paul, Only credit me with the Elastic line. Me thinks it should have been stated ALMOST TO as stretched to the point that the wire thins out in spots. Like in the use of the wire roller. Thin spots on a string will IMHO result in false beats on that wire. Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: paulrevenkojones at aol.com To: pianotech at ptg.org Sent: Tuesday, April 08, 2008 12:36 PM Subject: Re: sharp tuning Joe (and Wim): BZZZZT!. "Beyond it's elasticity" means that the string will now break. Overpitching a string will not cause false (real) beats in and of itself unless there is some bridge involvement. And chipping a piano even a half-step high seems to be way more than necessary. I have typically chipped the piano about 25 cents sharp, watched it fall, then chipped it again 10 cents sharp before actually tuning it, with very stable results. Paul -----Original Message----- From: Joe And Penny Goss <imatunr at srvinet.com> To: Pianotech List <pianotech at ptg.org> Sent: Tue, 8 Apr 2008 12:46 pm Subject: Re: sharp tuning Hi Wim, I suspect there will be a slurry of false beating sounds in the upper range of this instrument, caused by over stretching of the wire beyond it's elasticity. Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: Willem Blees To: pianotech at ptg.org Sent: Tuesday, April 08, 2008 11:03 AM Subject: Re: sharp tuning Noah Who ever restrung this piano really took a chance tuning the piano a whole step sharp. I chip a piano a half a step high, but even my first tuning is only 25 cents high. I don't think this dealer understands what is happening to this piano. Is he telling you to keep it a whole step high because he doesn't want to pay you to do more than just a tuning, or does he think customers won't notice. In my opinion, he is not being honest with him self, much less his customers. Willem (Wim) Blees, RPT Piano Tuner/Technician Honolulu, HI Author of The Business of Piano Tuning available from Potter Press www.pianotuning.com -----Original Message----- From: Noah Haverkamp <noahhaverkamp at yahoo.com> To: pianotech at ptg.org Sent: Tue, 8 Apr 2008 2:01 am Subject: sharp tuning i began to do a floor tuning at a warehouse last week and A4 was tuned as B4. i tuned it to A440. A3 was B3, so i tuned it to A220. about 3 notes later i felt really weird, so i informed the boss what was going on and was told to tune it where it was at. it had just received new strings. well that made it easier to tune, but i mean, ive never heard of tuning a piano a whole tone sharp. Noah Haverkamp Know-a Piano http://www.knowapiano.com 347-308-0094 Fax: 718-701-2071 ---------------------------------------------------------------------------- Get the MapQuest Toolbar, Maps, Traffic, Directions & More! ------------------------------------------------------------------------------ Get the MapQuest Toolbar, Maps, Traffic, Directions & More! -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080408/e9cae514/attachment-0001.html
This PTG archive page provided courtesy of Moy Piano Service, LLC