Hey there Joe Works for both slow and fast beating false beats... tho funny thing is when dealing with a rapid twitter as you call it, its not so much as the beat disappears entirely as it is it quites it down very much. Doesnt seem to effect the speed of the beat. With slow false beats they seem to just go away. I'm not really sure whats exactly happening here, but clearly one is adding to the strings speaking length when applying CA, some oil or protek as described below. Where as a screwdriver coupled to the bridge pin will slow down the false beat with increased pressure until it stops.... and then if you increase pressure further start to appear again and gain speed with more and more pressure.... adding to the string as mentioned below does not seem to affect the speed of the false beat, but rather somehow either damps it or alleviates some condition in the string that contributes to the false beat. The pitch drop may be related...or just another affect. How any of this would affect the back scale I dont know... what got you thinking about that ? I have tried of course applying to various lengths... but it seems the speaking length is the only one where any noticeable affect results. Cheers RicB Hi Richard, Interisting. My thought would be that you have masked the load on the string and the thin spot that is deviding the string into unequal parts. Or helping to stop the back scale from ringing. How fast was the false beat/ A slow roll or a rapid twitter or helped in both cases? Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com > Hi folks... > > I ran into another interesting goodbit dealing with classic false beats > the other day. Turns out in very very many situations dealing with the > kind of false beat that gets affected by coupling mass to the nearest(s) > bridge pins also reacts positively to the string being <<washed>> so to > speak with protek... valve oil... CA glue... just about anything that > will stay on the string. I find that a couple drops of protek spread > between the bridge pin and the striking point works best. The effect is > immediate and is accompanied by a predictable pitch drop for the treated > string. I wouldn't suggest letting any oil or such getting into the > bridge pin mind you. > > The thing is, this suggests that the classic false beat can be dealt > with by adding mass to the string itself. Which in turn raises more > questions with regard to the actual cause of the false beat to begin with. > > Cheers > RicB >
This PTG archive page provided courtesy of Moy Piano Service, LLC