Mike ?I'll second that.? It's so much easier to do what you've suggested?& there is no question about original plate locations.? I find uprights quite a bit more difficult in general to rebelly. Certainly no discounts apply. ? Dale Al,? Another pinblock option which the others have not mentioned yet: If the original block is still well attached to the back structure, rout out a cavity in the original block for each section of tuning pins, and inset a piece of new pinblock. Epoxy, screws, dowels, whatever makes you feel comfortable. This lets you preserve the plate/pinblock relationship, making soundboard/bridge alignment a lot less complicated, as described by Del.? Mike? ? AlliedPianoCraft wrote:? > I just got a call to rebuild a Stieff upright which the customer > believes was made in the 1920"s. He wants a new soundboard, pinblock etc.? > > While I have installed many soundboards (I don't make my own) and > pinblocks in grands, I have never replaced any in uprights.? > > I have two questions: 1, Is it more or less difficult to replace a > soundboard and pinblock on an upright? 2, Comparative price. How > should I estimate the job as compared to a grand.? > > Thanks for any input.? > > Al Guecia? -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080421/4f36d58c/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC