No But have heard the result of a bass string that was not held by the bridge pins, Corrected the matter quickly for no zizzle <g> Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "David Ilvedson" <ilvey at sbcglobal.net> To: <pianotech at ptg.org> Sent: Monday, January 14, 2008 12:14 PM Subject: Re: String termination question > Has anyone brought some piano wire up to pitch on a notched, but un-pinned bridge cap? Just to see how it sounded and behaved? I'm wondering what the difference is with the notch termination and pin termination... > > David Ilvedson, RPT > Pacifica, CA 94044 > > ----- Original message ---------------------------------------- > From: "Ron Nossaman" <rnossaman at cox.net> > To: "Pianotech List" <pianotech at ptg.org> > Received: 1/14/2008 11:00:04 AM > Subject: Re: String termination question > > > > >Now we have good termination, but we are > >> now also stuck with two axis of termination. One against the side of the pin > >> and one against the notch in the bridge. Hence the need to be careful that > >> both those axis are in alignment. > > >One more time. There is no need for careful alignment other > >than keeping the notch edge out of the speaking length. The > >pin is the termination. The PIN is the termination. THE PIN IS > >THE TERMINATION. That is in both the vertical and horizontal > >excursion, just as the capo is the termination in both the > >vertical and horizontal excursion. If the pin is tight in the > >cap at the cap surface, where it won't flagpole, there won't > >be the classic false beat even with the notch clear behind the > >pin. The beat is NOT caused by the string sliding up and down > >the pin. > >Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC