Question from a longtime piano player who's not a tech: How do you replace the pin block in a vertical piano?? (I thought it wasn't feasible...) thanks, Bill Miller, Norfolk VA ----- Original Message ----- From: "Jeff Deutschle" <oaronshoulder at gmail.com> To: <pianotech at ptg.org> Sent: Tuesday, April 07, 2009 10:30 AM Subject: Re: [pianotech] Old upright I'd love to see the pictures! Maybe you could answer a few questions. It seems that the achilles heel for old uprights is loss of downbearing at the treble break. Do you have a protocol for dealing with this? Also, I've been keeping my eye out for any brands that do not have a deep notch (deeper than the cap), or even no notch at all, for the treble break strut. Have you noticed any? On Tue, Apr 7, 2009 at 10:07 AM, Chuck Behm <behmpiano at gmail.com> wrote: > In our shop, we regularly restore old uprights for prices ranging from > $5,000 - 7500, so I agree with Dean in thinking Duaine's price is not out > in > left field (at least, here in rural Iowa, it wouldn't be). For the above > price range, we put on a 3 coat polyurethane finish, repin and restring > (and > sometimes replace the pinblock), repair the soundboard, shape or replace > hammers, put on new keytops, repair and regulate the action, etc. > ><SNIP>
This PTG archive page provided courtesy of Moy Piano Service, LLC