[pianotech] bass strings installation

[Porritt, David]

Tom:

I generally don't twist bass strings.  If I install one and it sounds like it needs a twist I'll do it, that of course makes an extra step but if I had very many that need twisting, I'd contemplate a different string maker.  I think well made bass strings shouldn't need twisting.

dp


David M. Porritt, RPT
dporritt at smu.edu

-----Original Message-----
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Thomas Cole
Sent: Thursday, April 23, 2009 12:34 PM
To: pianotech at ptg.org
Subject: Re: [pianotech] bass strings installation

Paul

I think there is a difference. One way requires that I pick up a pair of 
vice grips to apply the twist to the loop end. The pin end already has 
the tool conveniently attached.

As for the commute, I use slave labor to feed me bass strings.

Question: How important is it to twist bass strings? Does it depend on 
who made the strings?

Tom Cole

PAULREVENKOJONES at aol.com wrote:
> ...
> There are those who put the twist in the pin end, but it makes no 
> difference--the time is the same.
>  
> Paul
> Get the Radio Toolbar 
> <http://toolbar.aol.com/aolradio/download.html?ncid=emlcntusdown00000003>!