[pianotech] Slow drop fallboard hinge for YC

[Al Guecia/AlliedPianoCraft]

Thanks Cy. This model didn't have it. The customer wants it installed. Have you installed the decelerator? I need to come up with an estimate for the job. I have never done one before.

Al - 
High Point, NC

  From: Cy Shuster 
  Sent: Monday, April 26, 2010 2:05 PM
  To: pianotech at ptg.org 
  Subject: Re: [pianotech] Slow drop fallboard hinge for YC


  There are retrofit kits out there... a possible option.  Is your part missing, or just broken?


  http://www.pianofortesupply.com/decelerators.html


  --Cy--


  Cy Shuster, RPT
  Albuquerque, NM
  www.shusterpiano.com


  On Apr 26, 2010, at 11:48 AM, Al Guecia/AlliedPianoCraft wrote:


    I called YC and the person I spoke to (I think it was John Chang) said they don't have them in stock, nor do they sell them. Any ideas on how I can get a  slow drop fallboard hinge for a Young Chang G-150 would be greatly appreciated.

    Al - 
    High Point, NC
      From: Al Guecia/AlliedPianoCraft 
      Sent: Monday, April 26, 2010 12:50 PM
      To: Pianotech List 
      Subject: [pianotech] Slow drop fallboard hinge for YC


      I need a slow drop fallboard hinge for a Young Chang. Is this something you can only get directly from them?

      If so, does anyone have the number for their parts dept?

      Thanks,

      Al - 
      High Point, NC

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100426/f345f1f7/attachment.htm>