One time when I misplaced my Allen wrench, I used the tool, that I use to change hammer heads. You know, the one that is like an offset, square tip thing. John Ross, Windsor, Nova Scotia On 22-Jan-10, at 9:27 AM, Tom Driscoll wrote: > > > Tom, > Good suggestion, but if I misplace the hex tool I use the "Handy > Hammer" which has essentially a built in handle. . The only trouble > is that the bolt is much harder than the shaft of the tool and > loses the fight after time. > I had an embarrassing situation at a school back in the early 80's > when I explained to the music teacher why I couldn't get into the > piano. > She said "The last piano tuner didn't have that problem " > A janitor bailed me out ,but I was sure to get the hex key for my > kit. > The combo tool idea is a good example of what I advocate to some > of our friends that are new to the trade. Now this isn't a > groundbreaking solution to a complex problem but the attitude that > finds the solution here lends itself time and time again to more > difficult and certainly more interesting challenges. > > Tom --Off the soapbox-- Driscoll > > > ----- Original Message ----- > From: qshooterq at aol.com > To: pianotech at ptg.org > Sent: Friday, January 22, 2010 1:16 AM > Subject: Re: [pianotech] everett uprights > > Also, in a pinch, you can use the back end of a tuner's combination > tool. Use one of the sturdier ones and clamp a vise grip on it. > ---Tom Gorley -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100122/c5f0df10/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC