William, What are you using to hold the chuck and allen keys to the side of the press? That's worth the price of admission to me. David Stocker, RPT Tumwater, WA -------------------------------------------------- From: "William Monroe" <bill at a440piano.net> Sent: Saturday, January 30, 2010 22:53 To: <pianotech at ptg.org> Subject: [pianotech] 2 pictures for you > Depends, Michael, > > Are you looking to drill in the piano, or out of the piano. I drill > in the piano, took a page out of Ron N.'s book and built a copy of his > drill press rig. It utilizes a Grizzly Benchtop Radial drill press, > modified slightly. > > If you drill out of the piano, it really doesn't need to be anything > special. You're just drilling holes, in my opinion. > > William R. Monroe > > > > On Sat, Jan 30, 2010 at 10:40 PM, Michael Staples <mastaples at gmail.com> > wrote: > > I'm looking for recommendations for a drill press that would > perform well for new pin block drilling. Specific make and model or > general drill press features that would work well for this task would > be appreciated. > > Thank you, > > Michael Staples > PTG Associate Member >
This PTG archive page provided courtesy of Moy Piano Service, LLC