Has anyone ever tried to remove one of those 1" Velcro adhesive patches? Do they come off without taking the finish with it? David Love www.davidlovepianos.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Carlos Ralon Sent: Tuesday, January 11, 2011 6:18 AM To: pianotech at ptg.org Subject: Re: [pianotech] Steinway S and fallboard springs David The model S in my shop has a feble little spring on the base side that a fly could slam shut. It rubs against the side of the fall only when open. I use the (here we go again) Velcro strip method as previously posted when requested. The new crop comes in at Spring time. Carlos ----- Original Message ----- From: "David Love" <davidlovepianos at comcast.net> To: <pianotech at ptg.org> Sent: Tuesday, January 11, 2011 12:58 AM Subject: [pianotech] Steinway S and fallboard springs > Does anyone have a Steinway Model S handy that can tell me if the > fallboard > on that model typically uses those pressure springs to prevent it from > falling over too easily? > > David Love > www.davidlovepianos.com > > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC