Well that just made my mind up!!! Les K LK Piano (734)657-7034 Date: Wed, 26 Jan 2011 17:13:14 -0500 From: "Gerald Groot" <tunerboy3 at comcast.net> To: <pianotech at ptg.org> Subject: Re: [pianotech] advertising Message-ID: <019901cbbda6$3aa40680$afec1380$@net> Content-Type: text/plain; charset="us-ascii" Hi Susan, Sure. I had completed action work on a vertical. I filed hammers, replaced bridal straps, cleaned it all up spotless, etc., it came out beautiful. The next day, I went to my shop to retrieve the action wearing a tie all set to return it shortly thereafter. I leaned over the action to double check the hammers and other things when the tie clasp let loose of the tie. It was probably only partially grabbing it to begin with, I don't know and I don't care now but, it allowed the tie to go over top of the hammers. When I leaned back up and turned to walk away to my office, the backside of the tie caught on something on the action yanking the action off from the bench and onto the floor smashing it. I had broken hammers, broken dampers, broken wippens and a broken action bracket. That was the last time I wore a tie. Jer -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20110126/a853cfbb/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC