How about send them back to Baldwin and have them bored to the proper dimension? David Love www.davidlovepianos.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of richarducci at comcast.net Sent: Friday, January 06, 2012 1:00 PM To: pianotech at ptg.org Subject: [pianotech] Enlarging hammer shank List, Client with Acrosonic with hammer felts falling off moldings . Got a new set of hammers from Baldwin , but they are bored too large for original shanks. Limited budget so not going to replace butts (hammers come with shanks that fit,) but is there a way to modify original shanks to fit larger hammers? Rick Ucci Uccipiano.com=
This PTG archive page provided courtesy of Moy Piano Service, LLC