I agree! (need to check to Eastern Sky for emanations I think<G>) I have a saying: "If the keys aren't right, nothing else can be." It's been my mantra since the git-go. Has worked for me.<G> Joe > [Original Message] > From: Encore Pianos <encorepianos at metrocast.net> > To: <joegarrett at earthlink.net>; <pianotech at ptg.org> > Date: 1/6/2012 3:56:23 PM > Subject: RE: [pianotech] Spinet Repetition Problems > > To add to Joe's comment, if there is a lot of wear (cupping) in the key > bushings this can further slow the key returning to position and along with > it the jack, particularly on softer blows. This will be more pronounced > towards the ends of the keyboard, where the keys splay. > > Will Truitt > > > -----Original Message----- > From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf > Of Joseph Garrett > Sent: Friday, January 06, 2012 6:48 PM > To: pianotech > Subject: Re: [pianotech] Spinet Repetition Problems > > Martin Cipolla asked: "Spinet piano where the jacks on several keys are not > returning quick enough to allow repetition. I suspect the jack pin needs > lubed. Any suggestions on lubing this part without removing the action. I > understand removing a spinet action can be troublesome." > > Martin, > The major problem with Spinet regulation/repetition is the fact that most > need to have the keys back-weighted. The olde saw of "ya gotta have lost > motion in spinets", is really just bull. No matter how you regulate, etc. > the jacks will not get back in positon properly until the keys have been > weighted. I've done several, of late, and most players are suprised at how > nicely their piano plays after doing this procedure. It takes me about 3-4 > hours to do the job. Well worth it, imo. (cheaper'n buying another "better" > piano.<G> > Regards, > Joe > > > Joe Garrett, R.P.T. > Captain of the Tool Police > Squares R I > >
This PTG archive page provided courtesy of Moy Piano Service, LLC