Hi Ed, I've seen this problem w/WNG and attributed it to a rep spring that is too heavy a gauge for the hammer weight. If you add a couple of grams to the hammer and readjust the spring I think you'll see the problem disappear. Or try putting on a lighter gauge spring. David Stanwood >Have finally found a rebuild that can use the new space age WNG composite >parts. However, the jack will NOT return under the knuckle. (Steinway B). All >the geometry looks good, and I have put more spring in than is comfortable to >play, raised the rep lever until there is a noticeable gap between the height >of the jack, and when I pull the jack out from under, and let it go, it will >not return. > This is a problem I noticed on a lot of the Baldwin Renner actions years >ago. Has anybody with WNG experience dealt with this before? >Thanks, >Ed Foote RPT
This PTG archive page provided courtesy of Moy Piano Service, LLC