Wim - When did you originally post those? David Skol In April of last year. Apparently we had this discussion before, because I see in my file that the next time I tune this piano, I'm supposed to take pictures of the keys and send them to you. Wim -----Original Message----- From: David Skolnik <davidskolnik at optonline.net> To: pianotech <pianotech at ptg.org> Sent: Wed, Jan 25, 2012 9:24 am Subject: Re: [pianotech] Screw Adjustable Key leveling Wim - When did you originally post those? David Skol At 12:45 PM 1/25/2012, you wrote: David I'm the one who posted those pictures of a Ludwig grand with this design. I don't have the picture anymore, but I'm tuning this piano on April 9th. I'll be happy to take a few more pictures. Wim -----Original Message----- From: David Stanwood <stanwood at tiac.net> To: pianotech <pianotech at ptg.org> Sent: Wed, Jan 25, 2012 2:35 am Subject: [pianotech] Screw Adjustable Key leveling Years ago I saw a piano built with screws down through the key just behind the balance rail bushing. This is an old design. The bottom of the screw contacted the back side of the balance rail cloth punching and the keys could be leveled by turning the screw. I'd love to get a picture of this design for my class "Off Center Balance Rail Bearings". Any help would be appreciated. David Stanwood -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120125/fe765d38/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC