[pianotech] Screw Adjustable Key leveling

[David Skolnik]

Wim -
When did you originally post those?
David Skol


At 12:45 PM 1/25/2012, you wrote:
>David
>
>I'm the one who posted those pictures of a Ludwig grand with this 
>design. I don't have the picture anymore, but I'm tuning this piano 
>on April 9th. I'll be happy to take a few more pictures.
>
>Wim
>
>
>
>
>-----Original Message-----
>From: David Stanwood <stanwood at tiac.net>
>To: pianotech <pianotech at ptg.org>
>Sent: Wed, Jan 25, 2012 2:35 am
>Subject: [pianotech] Screw Adjustable Key leveling
>
>
>Years ago I saw a piano built with screws down through the key just
>behind the balance rail bushing.  This is an old design.  The bottom
>of the screw contacted the back side of the balance rail cloth
>punching and the keys could be leveled by turning the screw.  I'd
>love to get a picture of this design for my class "Off Center Balance
>Rail Bearings".   Any help would be appreciated.
>
>David Stanwood

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120125/cb1972f0/attachment.htm>