It is especially difficult when you get rid of nearly all of the quality control personnel, stop checking to see if things like the adhesive you received from a vendor is actually what you ordered and that it is being used before its expiration date, stop checking to make sure the adhesive is being mixed accurately before use and pay little attention to whether it is being used correctly and minor details like maximum open time are being adhered to. ddf Delwin D Fandrich Piano Design & Fabrication 6939 Foothill Court SW, Olympia, Washington 98512 USA Phone 360.515.0119 Cell 360.388.6525 del at fandrichpiano.com ddfandrich at gmail.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Ron Nossaman ... From a practical standpoint, manufacturing QC has *GOT* to be a nightmare on all levels, and I doubt few if anyone noticed anything at the time indicating this stuff would be a future problem. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC