I'm about to replace my first Pinblock. It's on Mini Piano named Gerard, and one can follow the progress here: https://www.facebook.com/media/set/?set=a.414081118675357.98495.146765508740254&type=1 The pinblock severely pulled away from the posts. It is a 3/4 plate, and there are large gaps behind the pinblock with no support. That's my current concern. I had epoxied and bolted the pinblock a few years ago, and it held for a couple years. My plan is to reread Chuck's Replacing the Pinblock series which was published a couple years ago in the Journal (and which I read at the time) and follow those steps. However, I believe[image: Inline image 1] I will need to add supports, fill in those gaps between the posts. Any glaring issues or recommendations from you experienced rebuilders before I start? Thanks! -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130202/e2067cbb/attachment-0001.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 81990 bytes Desc: not available URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130202/e2067cbb/attachment-0001.jpeg>
This PTG archive page provided courtesy of Moy Piano Service, LLC