Hey, Paul, Sometimes these hammers are a little bit cupped, and I have filed them some. Just that, or nothing. Hang them and see how they sound. Regards, Ken Z. On 4/8/08 10:01 AM, "Paul T Williams" <pwilliams4 at unlnotes.unl.edu> wrote: > > Hi gang, > > This summer I'm rebuilding the action on our 1956 Baldwin D using Renner > shanks/flanges and wippens. I'm also, per your previous reccommendations, > trying Ronsen-Wurzen hammers for the first time. I have some time before > summer arrives to "prep" the parts, weigh off the shanks, check pinning, etc. > My question is; What sort of pre-voicing should be done with these hammers? > Do they require pre-filing, juicing, needling etc.? They're already bored, > tapered and tails shaped nicely. > > Thanks for any input! > > Paul T. Williams RPT > Univ. of Nebraska -- Ken Zahringer, RPT University of Missouri School of Music -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20080408/24c64a31/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC