---------------------- multipart/alternative attachment "mary.tanguay" <mary.tanguay@SNET.Net> wrote:I am working with a customer who uses their piano for teaching and recitals.I have recommended a new pinblock, new strings,dampers,new shanks and flanges. What effect do worn hammers (filed almost to the wood in the treble section) have on touch and tone in a Steinway grand piano? When replacing a set of hammers would you also replace the shanks and flanges? The tuning pins have been replaced with 6/0 pins.The torque is from 20 inch pounds and jumping in the bass to 60 inch pounds in the treble.the torque is uneven. There students are advanced and require a good touch and tone.I need to present this to a committee please help with your coments and suggestions. Thank you ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/e5/8c/af/62/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC