Plate bolt question

[Ron Nossaman]

> Geoff…………..Randy Potter has a good method described in his video 
> “Intermediate Repairing Techniques”. If the bolt is stripped install “C” 
> clamps on both sides of the bolt so the plate doesn’t move out and than 
> drill out the hole so it goes completely out the back of the piano. You 
> than install a bolt with nuts and washers and pull it up tight. I would 
> think you would use stainless steel for the bolt and washers so they 
> don’t rust.
> 
> Ron Boyd


No Titanium?
Ron N