Patrick, Oh yes, I also plan on a fine tune procedure after I take all of the torque measurements I fell necessary. I agree with you in that the tuning process helps us become more intimate with the condition and idiosyncrasies of all the components involved. Then, perhaps, I can express any thought's I might have as to the pin tightness problem to the builder. I don't have a digital type of instrument to measure humidity. We usually have stable levels around 8 to 18 percent RH. Currently we're in a monsoon weather pattern and levels are 50 to 60 percent. It won't last long. I did send the pic's to files at ptg.org so hopefully they will be published. Thanks David Chadwick ----- Original Message ----- From: "J Patrick Draine" <jpdraine at gmail.com> To: "Pianotech List" <pianotech at ptg.org> Sent: Sunday, July 23, 2006 7:12 AM Subject: Re: Re: tuning pin torque > On 7/23/06, David Chadwick <chadwick61 at cox.net> wrote: >> >> I have not done >> any previous tuning on the piano. > > Aside from the thorough measurement of pin torque that you're planning > on doing, I do hope you will be tuning the instrument as well. While > hard numbers are difficult to argue with, there's a great deal that > you can learn about the piano as you tune, even if the words one uses > to describe it may be compartatively subjective. > And yes, we're eager for the photos! If they're big send them to > files at ptg.org. > Also, I think in the interest of fairness (or thoroughness) I think it > is important to measure the RH accurately, probably with a sling > psychlometer (sp?). And a good idea of what extremes the piano may go > through daily (searing stage lights, constant or intermittent intense > blasts of frigid AC, etc.). > Good luck and happy investigations, > Patrick Draine >
This PTG archive page provided courtesy of Moy Piano Service, LLC