In a message dated 7/25/2006 11:09:59 AM Eastern Standard Time, mfarrel2 at tampabay.rr.com writes: That's true if your piano is serving strictly a utilitarian role. If it is a performance piano (meaning any piano where good performance is desired/appreciated), then that rule breaks down quickly. Yes you are right, how true, I do hardly any concert work, that makes sense Also. Re: Pressing on the piano strings to test damper springs: In a message dated 7/25/2006 11:09:59 AM Eastern Standard Time, mfarrel2 at tampabay.rr.com writes: Such a procedure will not at all test the condition of the damper lever spring. It will tell you if the damper lever rod is improperly adjusted (or the sustain pedal or the damper heads themselves). If you wish to evaluate the performance of the damper lever spring, one needs to test the resistance to movement of the spring itself. Thank you, I didnt know this. Julia Gottshall Reading, PA -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060727/ff9536f5/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC