Pin depth.

[jolly roger]

At 08:26 AM 1/22/01 -0600, you wrote:
>Roger
>Thanks for the tip. I'm just starting one of these jobs and thought of using
>vacuum hose but it's too big. And I hadn't thought about the pin lengths,
>figuring they are all the same length out of the bag.
>
>Paul Chick
Hi Paul,
            I ditched about a dozen pins from a 100gm bag. Ron Overs made a
good point about checking for burrs near the point.   My current supplier
no problems, but some old stock that I have was unacceptable.
I like to use the longer pointed pins.
roger