This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Try www.Baldwin.com . You've asked just about every question that = -should- be in the service and/or sales specs!!!! Bob Moffatt Calgary, Alberta Canada > From: "Farrell" <mfarrel2@tampabay.rr.com> > Sent: Friday, March 09, 2001 4:39 AM > Subject: New Baldwin L Advice >=20 > In addition to what you find to be required prep, I have the following > specific questions: >=20 > How is the pinblock attached? Screwed/doweled/mortised to rim? = Glued/doweled > to stretcher? >=20 > Is the satin ebony lacquer? >=20 > Is it true that these pianos now have Renner hammers? Would these be = Renner > Blue? >=20 > What is factory spec touchweight? >=20 > Is the Baldwin soundboard radius crowned? >=20 > I read that the bridges are vertically laminated maple. Is there a > quartersawn bridgecap? >=20 > Any info regarding these questions will be GREATLY appreciated! Thanks >=20 > Terry Farrell > Piano Tuning & Service > Tampa, Florida > mfarrel2@tampabay.rr.com >=20 >=20 >=20 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/2e/0d/c5/26/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC