hi list i'm driving tuning pins on a samick grand. i have the PB supported with the PB support from Schaff, but the bottom lamination is separating from the PB. i've included pictures. i've got the nuts on the PB support as tight as they'll go, but the separation still happens. i've made my through half the pins; i just wanted to see if anyone thinks if i should stop. by the way, i pulled a small piece of the lamination off, so that's why there's a chunk missing in one of the photos. thanks daniel carlton -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070203/a00064dd/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: pb 1.jpg Type: image/jpeg Size: 73401 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20070203/a00064dd/attachment-0003.jpg -------------- next part -------------- A non-text attachment was scrubbed... Name: pb 2.jpg Type: image/jpeg Size: 85312 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20070203/a00064dd/attachment-0004.jpg -------------- next part -------------- A non-text attachment was scrubbed... Name: pb 3.jpg Type: image/jpeg Size: 71444 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20070203/a00064dd/attachment-0005.jpg
This PTG archive page provided courtesy of Moy Piano Service, LLC