Thanks for the info, Lar. Up here I am limited in supply places. Less than a million population in the Province/State. Might have to wait till my next trip to the US. I might go to the local trade school, and see if they might want to take it on as a project for the students. Just uninstalling the unit now, so I will have a better idea of what I am talking about. Best, John Ross Windsor, Nova Scotia On 2013-02-24, at 11:50 AM, "Larry RPT" <larry_fisher at pdxtuner.com> wrote: Fisher > Hi John, > > I had this problem 20 or better years ago. I called a pulley supply place I found in the yellow pages ........ maybe it was Graingers. They called the wheel part the sheave and the center part was called the hub I think. The idea being that you could order the diameter of the pulley and mate it up with the center part. I never proceeded past announcing my findings and my fee to the owner. Good luck. > > Lar > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130224/4f1bac10/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC